ALP Technology's 100W solar panels are an ultra-thin Mono PERC high-efficiency PV module generation system designed for off-grid power supply of RVs or campers. It integrates high-efficiency PERC cells (cell efficiency up to ≥23%) and intelligent MPPT controllers, with an average daily power generation of 0.5-0.7kWh (standard sunshine area), which can meet basic power needs such as car refrigerators, lighting, and mobile phone charging. The whole machine is only 2.5cm thick and weighs 5.2kg, suitable for installation on various roof curvatures.
Size of 100W Solar Panels For RV Campers


Product Features
High Efficiency
High efficiency, eco-friendly, high-power battery cell, high conversion efficiency
High-quality silicon wafers, excellent conductivity, 166 A-class battery cells, conversion efficiency ≥23%
Excellent Performance
Excellent low-light performance, high-strength loading performance
Extraordinary fire-resistant performance, adaptive under a variety of environments
User-friendly Design
Easy installation, customizable, practical, green photovoltaic design concept, with eco-friendly component technology and materials
High Strength
IP67 waterproof rating, dump-proof, high-strength anodized aluminum alloy frame, having passed the salt spray and anti-ammonia test, and service life up to 25 years
Efficiency And Stable Quality Assurance

Typical Application Scenarios
RV Off-grid Power Supply System
Basic configuration: 2×100W board + 200Ah lithium battery → Supports continuous operation of car refrigerator (45W) for 16 hours
Expansion plan: Supports multi-board parallel connection (up to 4 boards), adapted to 48V RV power grid
Camping Equipment Power Supply
Drive induction cooker (800W) for 1.5 hours | Projector (100W) for 5 hours
Emergency power supply: Can supplement power for new energy vehicles (daily range of 5-8km)
Special Vehicle Application
Mobile inspection vehicle equipment power supply
Field rescue vehicle communication guarantee
Electrical Performance Parameter (STC)
| Specification/ Model | Unit | ALPRVSP100W |
| Max Power (Pmax) | W | 100+3% |
| Open Circuit Voltage (Voc) | V | 22.72 |
| Max Voltage (Vmp) | V | 18.98 |
| Max Current (Imp) | A | 5.38 |
| Short Circuit Current (Isc) | A | 5.75 |
| Efficiency of Battery Cells (nm) | % | 19.25 |
STC: Standard Tested Condition: AM=1.5, T=25℃, 1000W/㎡
Mechanical Capacity
| Module Dimension | 980*530*25mm |
| Module Weight | ≈5.2Kg |
| Module Cell | 33(3*11)/ MonoPERC/ 166mm |
| Surface Material | Tempered Glass/ 3.2mm |
| Encapsulating Material | EVA |
| Frame | Anodized Aluminum Oxide |
| Protection Grade of Junction Box | IP67 |
| Cable Specification (Length/ Sectional Area) | 900mm/ 2.5mm2 |
| Connector | MC4 Compatible |
Temperature Coefficient
| Nominal Module Operating Temperature (NMOT) | 43±2℃ |
| Range of Operating Temperature | -40℃~+85℃ |
| Current Temperature Coefficient | 0.048%/℃ |
| Voltage Temperature Coefficient | -0.28%/℃ |
| Power Temperature Coefficient | -0.35%/℃ |
Operating Conditions
| Max Hail Impact | 25mm/23m/s |
| Max System Voltage | 1000V DC |
| Maxfuse Rated Current | 15A |
| Application Level | Class A |
IV Curves









