ALP Technology's 600-watt solar panel kit for RV is a fantastic addition to your recreational vehicle that will allow you to harness the power of the sun to provide electricity for all of your needs while on the road. You can easily charge your RV batteries, power your appliances, run lights, and even charge your electronic devices without worrying about running out of power.
This 600 watt solar panel kit typically includes:
- 4*150-watt solar panel
- 1*50Amp MPPT Controller SRNE SR-MC2450 12/24V-50A
- 1*Remote DisplaySRNE Tempt Sensor
- 1*MC4 RV cable kit 25ft Red and 25 ft Black with 2 ends
- 1*Z bracket Mounting Kit(4)
- 1*Battery Cable Kit 5 ft. Red & Black #8 Wire with lugs
Complete with basic wiring and mounting for your RV or travel trailer. Our 600-watt solar panel kit for RV makes adding solar to your RV easy and affordable. Installing a solar panel kit on your RV is relatively simple and can be done by most DIY enthusiasts. Once installed, you can enjoy the benefits of clean, renewable energy wherever your adventures take you.
Module Diagram
Features & Benefits
High Efficiency: The 600-watt solar panel kit has a high conversion rate and can directly convert sunlight into electrical energy. It can not only provide stable power support for RVs, but also reduce dependence on traditional energy and reduce environmental pollution.
Stable Performance and Long Service Life: The solar panel kit has stable performance and long service life, usually between 20-25 years, and does not require frequent replacement and maintenance, saving operating costs.
Easy Installation: The solar panel kit is easy to install and can be DIY installed on the RV, reducing installation costs. It can also be disassembled and moved at any time, which is very flexible and convenient.
Green and Environmentally Friendly: The solar panel kit also has the advantages of no noise, no pollution, and renewable, which conforms to the modern people's pursuit of green environmental protection and low-carbon life, and is the mainstream trend of future energy development.
Technical Parameters
Electrical Characteristics (STC)
| Max Power (Pmax) | W | 150+3% |
| Open Circuit Voltage (Voc) | V | 33.64 |
| Max Voltage (Vmp) | V | 28.47 |
| Max Current (Imp) | A | 5.27 |
| Short Circuit Current (Isc) | A | 5.54 |
| Efficiency of Battery Cells (nm) | % | 18.99 |
STC: Standard Tested Condition: AM=1.5, T=25℃,1000W/m²
Mechanical Capacity
| Module Dimension | 1490*530*25mm |
| Module Weight | ≈7.8Kg |
| Module Cell | 51(3*17)/ MonoPERC/ 166mm |
| Surface Material | Tempered Glass/ 3.2mm |
| Encapsulating Material | EVA |
| Frame | Anodized Aluminum Oxide |
| Protection Grade of Junction Box | IP67 |
| Cable Specification (Length/ Sectional Area) | 900mm/ 2.5mm2 |
| Connector | MC4 Compatible |
MPPT Controller
| Specification/ Model | Unit | MC4250N10 |
| Max Open Circuit Voltage (Voc) | Vdc | 100 |
| MPPT Voltage Range | V | (Battery voltage+2)~72 |
| Max PV Input Power | / | 660W 12V/ 1320W 24V |
| Battery Type | / | FLD/GEL/LI/SLD/User Defined |
| Rated Battery Voltage | Vdc | 12/24 |
| Battery Voltage Range | Vdc | 9-32 |
| Rated Charging Current | A | 50 |
| MPPT Tracking Efficiency | / | >99% |
| Weight | / | 1.335kg (2.94lb) |
| Dimension | / | 183*127*69.5mm (5.9*4.16*2.74in) |
| Protection Degree | / | IP32 |
How To Install Solar Panel Kit For RV
Installing a 600 watt solar panel kit on your RV can greatly enhance your outdoor adventures by providing a reliable source of clean energy. Here are some steps to help you with the installation process:
Choose The Right Location: Select a suitable location on your RV where you can mount the solar panels. Make sure it is an area that receives ample sunlight throughout the day to maximize energy production.
Gather Your Tools: Before you begin the installation, make sure you have all the necessary tools on hand. This may include a drill, screwdriver, wrench, and any additional hardware that comes with the solar panel kit.
Mount The Solar Panels: Carefully position the solar panels on the roof of your RV according to the manufacturer's instructions. Use appropriate mounting brackets to secure the panels in place, making sure they are angled towards the sun for optimal energy absorption.
Connect The Panels: Once the panels are securely mounted, connect them to the charge controller using the provided cables. The charge controller regulates the flow of electricity from the solar panels to the RV's battery system, protecting it from overcharging.
Connect The Battery: Connect the charge controller to the RV's battery system, ensuring proper polarity to avoid any damage. This will allow the solar panels to charge the batteries and power your RV's electrical devices.
Test The System: Before hitting the road, test the solar panel kit to ensure everything is functioning properly. Make sure the panels are producing electricity and that the batteries are charging effectively.
Enjoy Your Solar-powered Adventures: With your new 600 watt solar panel kit installed, you can now enjoy the convenience of clean and renewable energy while exploring the great outdoors in your RV.
